|
Part Numbers 1230 / 1230T / 1184 / 1184T / 6230 / 6184 (Clips) |
| Scroll down for Features and Benefits! |
|
5mm Fuse Clip |
Connector |
| Loose Part No. |
1230 |
1230T |
1184 |
1184T |
| Reeled Part No. |
6230 |
6184 |
| Dim 'A' |
0.165" (4.19mm) |
0.090" (2.29mm) |
| Material Thickness / Type |
0.016" (0.40mm) Phosphor Bronze |
| Standard Finish |
100% Tin over Copper |
| Feeder System |
Surf-Shooter SMT Continuous Strip Feeder |
| U.S. Patent No. 5,695,348 and other U.S. and international patents |
| Features and Benefits |
- Individual clips can be randomly placed;
- Clips don’t float during reflow;
- Available in two gap widths: the 0.165” gap is for use with a standard 5mm fuse or the 0.095” gap is for use as a 1/8th inch (.125”) pin receptacle;
- Gap dimension / contact force can be optimized for your specific application depending on mating cycles, voltage current and operating environment;
- High pressure, gas tight connection;
- Designed for automation using the customer’s existing pick and place equipment and a special feeder, no time consuming hand placement or costly fixturing required, or they can be automated using standard tape feeders.
|
|
|
Surface Mount Connectors
Through Hole Connectors
