about usnewsresourcespart findermating partsloginfaq


Through Hole
Technology Overview
Tabs / Quick Disconnect Terminals
Test Point Terminals
Miniature Socket - Pro Wave Connectors
Receptacles
Wire Connectors
Screw Terminals / Binding Posts
Posts
Taped Terminals for Radial Insertion Machines
Plating Specifications
Plating Specifications
Zierick’s standard finish is a minimum of 150 millionths of 100% tin over a minimum of 100 millionths copper. If there is no dash after the Part Number, the finish is as stated in the catalog product description. Finishes other than standard are explained in the table below.

Finish Description
0 0.000150" (0.0038mm) 100% Matte Tin over 0.000100" (0.0025mm) Copper
1 0.000050" (0.0013mm) Hot Solder Dip (60% Tin, 40% Lead)
2 0.000050" (0.0013mm) Hot Tin Dip (100% Tin)
3 0.000150" (0.0038mm) Bright Tin over 0.000100" (0.0025mm) Copper
4 0.000100" (0.0025mm) Nickel
Note: Not recommended for parts which will be soldered.
5 Cleaned and Polished
6 0.000150" (0.0038mm) 95/5 Matte Tin/Lead over 0.000100" (0.0025mm) Copper
7 0.000100" (0.0025mm) Bright Tin
Note: Not recommended for parts which will be soldered.
8 0.000100" (0.0025mm) Matte Tin
Note: Not recommended for parts which will be soldered.
9 No finish (Bare Base Metal)
10 Pre-Finished Ni over base metal
11 Pre-Finished 100% Hot Tin Dip (consult factory for thickness). Material edges will be bare.
12 Pre-Finished 0.000150" (0.0038mm) 95/5 Matte Tin/Lead over 0.000100" (0.0025mm) Copper. Material edges will be bare.
13 0.000150" (0.0038mm) 100% Matte Tin over Steel
14 0.000005" (0.00013mm) Gold over 0.000050" (0.0013mm) Nickel
15 0.000200" (0.0051mm) 100% Matte Tin over 0.000100" (0.0025mm) Nickel
16 Pre-finished 100% Matte Tin 0.000150" (0.0038mm) over 0.000100" (0.0025mm) Copper. Edges will be bare.
19 0.00003" (0.00076mm) Gold over 0.000030" Min (0.00077mm) Nickel
MS Parts made to military standards have the prefix MS before the part number and are plated to the military standard of 0.0005" (0.0127mm) Min 100% Tin over 0.000150" (0.0038mm) Copper
SP Special finish (consult factory)
Solderability: In Accordance with ANSI/J-STD-002, category 3, test method appropriate to the test sample.

This table does not represent all available finish types.
Finishes other than the standard will be special orders; pricing and availability may vary.
Please consult factory.
Enter your email address to sign up to receive our email newsletter:  
See What We Have to Offer
Learn More about Zierick
Get Help When You Need It
previous next ZMC ISO 9001 Certification Council of Industry of Southeastern New York Precision Metalforming Association Zierick on YouTube Zierick on Facebook Zierick on Blogger Zierick on LinkedIn