| Finish |
Description |
| 0 |
0.000150" (0.0038mm) 100% Matte Tin over 0.000100" (0.0025mm) Copper |
| 1 |
0.000050" (0.0013mm) Hot Solder Dip (60% Tin, 40% Lead) |
| 2 |
0.000050" (0.0013mm) Hot Tin Dip (100% Tin) |
| 3 |
0.000150" (0.0038mm) Bright Tin over 0.000100" (0.0025mm) Copper |
| 4 |
0.000100" (0.0025mm) Nickel Note: Not recommended for parts which will be soldered. |
| 5 |
Cleaned and Polished |
| 6 |
0.000150" (0.0038mm) 95/5 Matte Tin/Lead over 0.000100" (0.0025mm) Copper |
| 7 |
0.000100" (0.0025mm) Bright Tin Note: Not recommended for parts which will be soldered. |
| 8 |
0.000100" (0.0025mm) Matte Tin Note: Not recommended for parts which will be soldered. |
| 9 |
No finish (Bare Base Metal) |
| 10 |
Pre-Finished Ni over base metal |
| 11 |
Pre-Finished 100% Hot Tin Dip (consult factory for thickness). Material edges will be bare. |
| 12 |
Pre-Finished 0.000150" (0.0038mm) 95/5 Matte Tin/Lead over 0.000100" (0.0025mm) Copper. Material edges will be bare. |
| 13 |
0.000150" (0.0038mm) 100% Matte Tin over Steel |
| 14 |
0.000005" (0.00013mm) Gold over 0.000050" (0.0013mm) Nickel |
| 15 |
0.000200" (0.0051mm) 100% Matte Tin over 0.000100" (0.0025mm) Nickel |
| 16 |
Pre-finished 100% Matte Tin 0.000150" (0.0038mm) over
0.000100" (0.0025mm) Copper. Edges will be bare.
|
| 19 |
0.00003" (0.00076mm) Gold over 0.000050" Min (0.0013mm) Nickel |
| MS |
Parts made to military standards have the prefix MS before the part number and are plated to the military standard of 0.0005" (0.0127mm) Min 100% Tin over 0.000150" (0.0038mm) Copper |
| SP |
Special finish (consult factory) |
| Solderability: In Accordance with ANSI/J-STD-002, category 3, test method appropriate to the test sample. |
Hardware
