site map | contact us | tech resources | news | directions | employment
search
  Providing innovative solutions to complex interconnection requirements for over 90 years
Home Home About Us About Us Connectors Connectors Hardware Hardware Equipment Equipment Custom Solutions
Surface Mount Connectors
Technology Overview
Application Design Concepts
Pins and Posts
Tabs / Quick Disconnect Terminals
Headers
Board Stacking Connectors
Wire Connectors
Jumpers
Part Numbers 1179 / 1179T / 6179
Part Numbers 6233-AAAA-xxx
Receptacles
Plating Specifications
Through Hole Connectors


Part Numbers 6233-AAAA-xxx (Variable Size Jumpers)


  
Inventory
Part Number 6233-001
5,000 parts available
as of 7:00 am EST on Mar 11, 2010.
Part Number 6233-002
This part is currently out of stock. Check with customer service to find out when this part will be available.
Part Number 6233-310-140
This part is currently out of stock. Check with customer service to find out when this part will be available.
Part Number 6233-585-200
This part is currently out of stock. Check with customer service to find out when this part will be available.
Part Number 6233-787-140
This part is currently out of stock. Check with customer service to find out when this part will be available.
Part Number 6233-787-140-T
This part is currently out of stock. Check with customer service to find out when this part will be available.
Drawings
2D drawing for 6233-001 / 6233-002 / 6233-310-140 / 6233-585-200 / 6233-787-140 / 6233-787-140-T
Additional Resources
Printer Friendly Version
Technology Overview

Reeled Part No. 6233-001 6233-002 6233-310-140 6233-585-200 6233-787-140
Taped Part No. 6233-787-140-T
Dim 'A'* 0.300"
(7.62mm)
0.485"
(12.3mm)
1.500"
(38.1mm)
0.585"
(14.9mm)
0.787"
(20.0mm)
Dim 'B'* 0.075"
(1.91mm)
0.075"
(1.91mm)
0.075"
(1.91mm)
0.200"
(5.08mm)
0.140"
(3.56mm)
Material Thickness / Type 0.020" (0.50mm) Copper
Standard Finish 100% Tin Over Copper
Applicator System Standard 24mm Tape Feeder
Zierick recommends .006" stencil thickness for most applications. For other stencil thicknesses, call Zierick's product development department.

Dim 'A'* Dim 'B'*
Minimum 0.300" (7.62mm) 0.075" (1.91mm)
Maximum 1.500" (38.1mm) 0.200" (5.08mm)

*Where Dimension ‘A’ = jumper length and Dimension ‘B’ = jumper width.
Different lengths and widths are available. Please consult factory.


Features and Benefits
  • Eliminates the need for hand soldering wires to the board
  • Economical passive connector
  • Designed for automation using the customer’s existing pick and place equipment and a special feeder - no time consuming hand placement or costly fixturing required
  • Can be automated using standard tape feeders.

1-800-882-8020   ©2010 Zierick Manufacturing Corporation