Zierick Manufacturing: Engineered Interconnection Solutions
home home surface mount connectors through hole connectors hardware equipment custom solutions home
Surface Mount
Technology Overview
Application Design Concepts
Pins and Posts
Tabs / Quick Disconnect Terminals
Technology Overview
0.187" (4.75mm)
0.250" (6.35mm)
Part Number 6284
Part Numbers 1285 / 6285 / 1285TG / 1285TG-SR
Headers
Board Stacking Connectors
Wire Connectors
Jumpers
Receptacles
Plating Specifications
Part Numbers 6195

Features and Benefits
  • Part Number 6195 is being replaced by a new, less expensive, and more robust SMT Tab / Quick Disconnect, Part Number 6285. Here’s why!
  • High retention forces
  • Shoulder on part provides a stand-off for the mating part from the PCB
  • Retains typical through-hole Quick Disconnect Tab features
  • Doesn’t float during reflow
  • Designed for automation using the customer’s existing pick and place equipment and a special feeder - no time consuming hand placement or costly fixturing required
  • Feature at the tip for pick and place automation
  • Can be automated using standard tape feeders
Inventory
Part Number 6195
128,500 parts available
but may not be available at time of order.
Drawings
2D drawing for 6195
Additional Resources
Printer Friendly Version
Technology Overview
 
Strip 6195
Hole Dimension 0.070" (1.78mm) hole
Material Thickness / Type 0.032" (0.81mm) Brass
Standard Finish Loose: 100% Tin over Copper
Reeled: 100% Tin over Copper
Current Rating 25 Ampere
Feeder System Standard 24mm Tape Feeder
U.S. Patent No. 5,695,348 and other U.S. and international patents
Zierick recommends .006" stencil thickness for most applications. For other stencil thicknesses, call Zierick's product development department.
©2011 Zierick Manufacturing Corporation • 131 Radio Circle, Mt. Kisco, NY 10549 USA • 800-882-8020 • contactus@zierick.com