Part Numbers 1307 / 1307T

Features and Benefits
  • Most economical way to terminate wire to board
  • Smallest Footprint
  • No additional strain relief required
  • No additional wire preparation required
  • Terminal lends itself to high speed automated termination
  • Available in taped format – no need for additional assembly equipment
Loose Part No. 1307
Taped Part No. 1307T (16mm Tape per EIA-481)
Wire Sizes
(For Stranded Wire)
24 AWG
Insulation Outside Diameter .045 in. (Nominal)
Material Thickness / Type 0.010" (0.254mm) C26000 Brass
Standard Finish Pre-finished 100% Matte Tin over Copper. Edges will be bare. (16)
Current Ratings
Wire Size – AWG (Type)Current Rating/Amps Underwriters Lab LogoUnderwriters Lab Logo
24 AWG Stranded3.5
Feeder System Standard 16mm Tape Feeder for PN 1307T
Crimping System Mini Press (for high volume applications)
Versa-Crimp (for low volume applications)
WTC-1307-1 (for low volume and/or field terminations)
  Patent Pending
UL File Number E361770 Underwriters Lab Logo
Excessive part movement can occur if insufficient force is used to place part in paste or if excessive static pressure is used in reflow.
Zierick recommends .006" (0.15mm) stencil thickness for most applications. For other stencil thicknesses, call Zierick's product development department.
Consult the factory for other center-to-center spacing between adjacent terminals.