| Loose Part No. |
1307 |
| Taped Part No. |
1307T (16mm Tape per EIA-481) |
Wire Sizes
(For Stranded Wire) |
24 AWG |
| Insulation Outside Diameter |
.045 in. (Nominal) |
| Material Thickness / Type |
0.010" (0.254mm) C26000 Brass |
| Standard Finish |
Pre-finished 100% Matte Tin over Copper. Edges will be bare. (16) |
| Current Ratings |
| Wire Size – AWG (Type) | Current Rating/Amps   |
| 24 AWG Stranded | 3.5 |
|
| Feeder System |
Standard 16mm Tape Feeder for PN 1307T |
| Crimping System |
Mini Press (for high volume applications)
Versa-Crimp (for low volume applications)
WTC-1307-1 (for low volume and/or field terminations) |
| |
Patent Pending |
| UL File Number |
E361770  |
|
Excessive part movement can occur if insufficient force is used to place part in paste or if excessive static pressure is used in reflow. |
|
Zierick recommends .006" (0.15mm) stencil thickness for most applications. For other stencil thicknesses, call Zierick's product development department. |
|
Consult the factory for other center-to-center spacing between adjacent terminals. |
Surface Mount
