|
Part Number 1286 Crimp Terminal |
| Scroll down for Features and Benefits! |
| Watch the Crimp Terminal movie! |
| Loose Part No. |
1286 |
| Taped Part No. |
1286T |
| Material Thickness / Type |
0.016" (0.41mm) CDA 260 Brass |
| Standard Finish |
Pre-Plated 100% Tin over Copper |
| Feeder System |
Surf-Shooter SMT Loose Piece Feeder (Pin Shooter)
Standard 12mm Tape Feeder for PN 1286T |
| |
U.S. and international patents applied for |
| Features and Benefits |
- Most economical way to terminate wire to board;
- Smallest footprint;
- High current carrying capability - current rating of the termination is the same as the current rating of the terminated wire - terminal acts as a heat sink;
- No separate strain relief required;
- High resistance to wire flexing and axial and radial pull forces;
- Terminal lends itself to high speed automated termination;
- Designed to be bulk fed with a special feeder - no surface mount taping required, making terminal more economical;
- Available in taped format for low volume users.
|
|
|
Surface Mount Connectors
Through Hole Connectors
