Part Numbers 6239 / 6240

Features and Benefits
  • Available in brass or copper alloy for high conductivity
  • Applicable for .100” on-center applications
  • Individual pins can be randomly placed
  • Pins don’t float during reflow
  • Pins are reliably perpendicular
  • Available in two heights, .375” and .250”
  • Designed for automation using the customer’s existing pick and place equipment and a special feeder - no time consuming hand placement or costly fixturing required
  • The shoulder assures the vacuum pick-up nozzle will not descend too close to the solder pad or pick up paste
Reeled Part No. 6239 6240
Pin Length (L) 0.250" (6.35mm) 0.375" (9.53mm)
Material Thickness / Type 0.012" (0.30mm) C26000 Brass
Standard Finish 100% Matte Tin over Copper (0)
Current Rating 8 Amperes
Feeder System Surf-Shooter SMT ™Continuous Strip Feeder
U.S. Patent Nos. 5,632,629, 5,695,348, 5,730,608, 5,816,868 and other U.S. and international patents
Zierick recommends .006" (0.15mm) stencil thickness for most applications. For other stencil thicknesses, call Zierick's product development department.