Part Numbers 1216 / 6216 / 1222 / 6222 / 6246

Features and Benefits
  • Available in brass or copper alloy for high conductivity
  • Applicable for .100” on-center applications
  • Individual pins can be randomly placed
  • Pins don’t float during reflow
  • Pins are reliably perpendicular
  • Available in two heights, .375” and .250”
  • Designed for automation using the customer’s existing pick and place equipment and a special feeder - no time consuming hand placement or costly fixturing required
Loose Part No. 1216 1222 N/A
Reeled Part No. 6216 6222 6246
Pin Length (L) 0.375" (9.53mm) 0.250" (6.35mm) 0.375" (9.53mm)
Material Thickness / Type 0.012" (0.30mm) C26000 Brass 0.012" (0.30mm) C11000 Copper
Standard Finish 100% Matte Tin over Copper (0)
Current Rating 8 Amperes
Feeder System Surf-Shooter SMT ™ Continuous Strip Feeder
U.S. Patent Nos. 5,632,629, 5,695,348, 5,730,608, 5,816,868 and other U.S. and international patents
Zierick recommends .006" (0.15mm) stencil thickness for most applications. For other stencil thicknesses, call Zierick's product development department.