about usnewsresourcespart findermating partsloginfaq

categorySMT Feeder / Strip Terminals
categorySMT Feeder / Loose Terminals
categorySMT Crimp Tools
category MP 1000
category MP 2000
category Versa-Crimp
category Hand Tools
categoryPart Numbers WTC-1286-1 / WTC-1295-1
categoryPart Number WTC-1300-1
categoryPart Number WTW-1293
category Part Number WTW-IPC-2-1
categoryPart Number WTC-1307-1
categoryTHT 9700XY
categoryTHT 9700
categoryHand Insertion Tools
categoryIDC Wire Insertion Tools
categoryTooling/PN Reference

Part Number WTW-IPC-2-1

   WTC Tools
Figure 1: WTW-IPC-2-1 Termination Tool
LCD Video Screen & Camera System
Figure 2: Wire Placement in Tool
LCD Video Screen & Camera System
Figure 3: Force Adjustment Sprocket
Part Number WTW-IPC-2-1 This Wire Termination tool can be used to terminate wires for Zierick Part Number IPC-2-1-T (Surface Mount Insulation Piercing Crimp Terminal for Coaxial Cable) in low volume or in the field (Figure 1). Crimping Instructions:
  • Place stripped wire (coax cable needs the outer jacket and braid stripped approximately 0.250(6.35mm)) into the IPC-2-1-T Coaxial Terminal.
  • Place the board mounted terminal and cable into the Wire Termination Tool as shown in the picture (Figure 2).
  • Squeeze the Tool handle to push the terminal down until hand tool releases.
  • If greater activation force is needed, adjust by loosening Philips screw and turning sprocket to proper setting (Figure 3).
Crimp Hand Tool Part Number:
  • WTW-IPC-2-1
See What We Have to Offer
Learn More about Zierick
Get Help When You Need It
previous next ZMC ISO 9001 Certification Council of Industry of Southeastern New York Precision Metalforming Association Zierick on YouTube Zierick on Facebook Zierick on Blogger Zierick on LinkedIn