Home
about usnewsresourcespart findermating partsloginfaq


categoryEquipment
categorySMT Feeder / Strip Terminals
categorySMT Feeder / Loose Terminals
categorySMT Crimp Tools
category MP 1000
category MP 2000
category Versa-Crimp
category Hand Tools
categoryPart Numbers WTC-1286-1 / WTC-1295-1
categoryPart Number WTC-1300-1
categoryPart Number WTW-1293
categoryPart Number WTW-IPC-2-1
category Part Number WTC-1307-1
categoryTHT 9700XY
categoryTHT 9700
categoryHand Insertion Tools
categoryIDC Wire Insertion Tools
categoryTooling/PN Reference

Part Number WTC-1307-1

   WTC-1307-1 Termination Tool
Figure 1: WTC-1307-1 Termination Tool
 
Wire Placement in Tool
Figure 2: Wire Placement in Tool
 
Wire Crimped in Hand Termination Tool
Figure 3: Wire Crimped in Hand Termination Tool
 
This Wire Termination tool can be used to terminate wires for Zierick Part Number 1307 (Surface Mount Insulation Piercing Crimp Terminal) in low volume or in the field (Figure 1).

Crimping Instructions:

  • Place wire over the SMT Crimp Terminal using slight pressure. Align the Notch on the side of the anvil with the ‘Fingered’/tall side of the part (Figure 2).
  • Squeeze the Tool handle to push the terminal down until hand tool releases (Figure 3).
Crimp Hand Tool Part Numbers:
  • WTC-1307-1
1307 Hand Tool Orientation and Edge Distance
1307 Hand Tool Orientation and Edge Distance
 
See What We Have to Offer
Learn More about Zierick
Get Help When You Need It
previous next ZMC ISO 9001 Certification Council of Industry of Southeastern New York Precision Metalforming Association Zierick on YouTube Zierick on Facebook Zierick on Blogger Zierick on LinkedIn